Close

    • Another F80 M3 on the verge of 9's - Pure Turbos Stage 2 S55 runs 10.1@139

      There is a 9-second S55 platform car as you already know. It will be joined soon by other cars as more F80 M3's and F82 M4's get close to breaking into the 9's. This particular F80 M3 is already on the doorstep with a 10.112 @ 139.07 pass.


      Here is the recipe:

      PureTurbos Stage 2
      - Flash by ProTuning Freaks
      - FBO
      - E85 Fuel
      - BMS PI Controller
      - Fuel-It! LPFP and PI
      - Dodson DCT clutches

      When the temps drop this should be an easy 9-second car. Additionally, the first stock internal 9-second S55.


      This article was originally published in forum thread: Another F80 M3 on the verge of 9's - Pure Turbos Stage 2 S55 runs 10.1@139 started by Sticky View original post
      Comments 17 Comments
      1. Eleventeen's Avatar
        Eleventeen -
        Nice!!! Knocking on the door of 140 traps, too.
      1. gzim335's Avatar
        gzim335 -
        im pretty sure thats max psi f80 n its not on stock internals unless im wrong
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by gzim335 Click here to enlarge
        im pretty sure thats max psi f80 n its not on stock internals unless im wrong
        I think you're right.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by gzim335 Click here to enlarge
        im pretty sure thats max psi f80 n its not on stock internals unless im wrong
        Edited.

        No nitrous, Full E85.
      1. BLKROKT's Avatar
        BLKROKT -
        Stock internals?
      1. BlackJetE90OC's Avatar
        BlackJetE90OC -
        This is the car that spun its crank hub, then spun it again with Gintanis one piece crank hub.

        Guess they got it running again.
      1. Sticky2's Avatar
        Sticky2 -
        Click here to enlarge Originally Posted by BLKROKT Click here to enlarge
        Stock internals?
        No.
      1. lfelunden's Avatar
        lfelunden -
        HCP flash via bootmod3 !
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by lfelunden Click here to enlarge
        HCP flash via bootmod3 !
        Ah you tuned it? Thought Maximum PSI would tune their own.

        Great work.
      1. maximumpsi's Avatar
        maximumpsi -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Ah you tuned it? Thought Maximum PSI would tune their own.

        Great work.
        We have all the tools necessary to tune/flash any of the newer turbo BMW's in-house. We have worked with Halim and other tuners since we purchased our F80.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by maximumpsi Click here to enlarge
        We have all the tools necessary to tune/flash any of the newer turbo BMW's in-house. We have worked with Halim and other tuners since we purchased our F80.
        I don't doubt it. Well done.

        Would like to get the full engine specs.
      1. Stucks's Avatar
        Stucks -
        very nice.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by maximumpsi Click here to enlarge
        We have all the tools necessary to tune/flash any of the newer turbo BMW's in-house. We have worked with Halim and other tuners since we purchased our F80.
        You specified no nitrous which I found interesting. Are you implying the 9 second run is with nitrous?

        Both the TPG car and the Maximum PSI car are virtually identical in power mods right? Yet the other car is trapping higher, right?
      1. maximumpsi's Avatar
        maximumpsi -
        I haven't got a reply from Jason yet! With or without, it is still the first 9 second pass. Our cars are very similar.

        I had a productive dyno day yesterday and we went out to try and make some passes but broke an axle the first hit. The car was making good peak numbers last friday but the top end fell off big time. Now it is looking stout. If anyone has a broken axle for an F80 or F82 please let us know.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by maximumpsi Click here to enlarge
        I had a productive dyno day yesterday and we went out to try and make some passes but broke an axle the first hit.
        Stock axle or upgraded?

        Click here to enlarge Originally Posted by maximumpsi Click here to enlarge
        The car was making good peak numbers last friday but the top end fell off big time.
        Any ideas why it was falling off hard?
      1. maximumpsi's Avatar
        maximumpsi -
        Stock axles. I have run stock parts in my cars for years with minimal failures. We are installing dss axles when they arrive.

        Yes, we know. We hit the track without any dyno time and we're making changes there. Once we went to the dyno we saw some substantial improvements.

        I know they have tried nitrous but he said not on that pass. I hope to have similar trap speeds next time we hit the track.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by maximumpsi Click here to enlarge
        I know they have tried nitrous but he said not on that pass.
        Interesting, thanks.